USART introduction The universal synchronous asynchronous receiver transmitter (USART) offers a flexiblemeans of full-duplex data exchange with external equipment requiring an industry standardNRZ asynchronous serial
Category: Embedded System
STM32-Peripheral’s-UART: Interrupt Mode
USART introduction The universal synchronous asynchronous receiver transmitter (USART) offers a flexiblemeans of full-duplex data exchange with external equipment requiring an industry standardNRZ asynchronous serial
STM32-Peripheral’s-UART: Polling Mode
USART introduction The universal synchronous asynchronous receiver transmitter (USART) offers a flexiblemeans of full-duplex data exchange with external equipment requiring an industry standardNRZ asynchronous serial
STM32-Peripheral’s-ADC: Watchdog Mode
Analog watchdog: The AWD analog watchdog status bit is set if the analog voltage converted by the ADC isbelow a lower threshold or above a
STM32-Peripheral’s-ADC: Timer interrupt mode
An analog to digital converter is a circuit that converts a continuous voltage value (analog) to a binary value (digital) that can be understood by
STM32-Peripheral’s-ADC: Continuous Mode
An analog to digital converter is a circuit that converts a continuous voltage value (analog) to a binary value (digital) that can be understood by
STM32-Peripheral’s-ADC: Polling Method
An analog to digital converter is a circuit that converts a continuous voltage value (analog) to a binary value (digital) that can be understood by
STM32-Peripheral’s-DAC:
The Digital to Analog converter (DAC) is a device, that is widely used for converting digital pulses to analog signals. There are two methods of
STM32-Peripheral’s-GPIO: Output, Input
GPIO Peripheral features Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each port bit of theGeneral Purpose IO (GPIO)
Low Power MCU
Embedded system design is very interesting topic major area of system design is cover in Embedded System Design Guide blog, but to design system with
