Analog watchdog: The AWD analog watchdog status bit is set if the analog voltage converted by the ADC isbelow a lower threshold or above a
Year: 2021
STM32-Peripheral’s-ADC: Timer interrupt mode
An analog to digital converter is a circuit that converts a continuous voltage value (analog) to a binary value (digital) that can be understood by
STM32-Peripheral’s-ADC: Continuous Mode
An analog to digital converter is a circuit that converts a continuous voltage value (analog) to a binary value (digital) that can be understood by
STM32-Peripheral’s-ADC: Polling Method
An analog to digital converter is a circuit that converts a continuous voltage value (analog) to a binary value (digital) that can be understood by
STM32-Peripheral’s-DAC:
The Digital to Analog converter (DAC) is a device, that is widely used for converting digital pulses to analog signals. There are two methods of
STM32-Peripheral’s-GPIO: EXTI
The external interrupt/event controller consists of edge detectors for generatingevent/interrupt requests. Each input line can be independently configured to select the type(interrupt or event) and
STM32-Peripheral’s-GPIO: Output, Input
GPIO Peripheral features Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each port bit of theGeneral Purpose IO (GPIO)
Low Power MCU
Embedded system design is very interesting topic major area of system design is cover in Embedded System Design Guide blog, but to design system with
STM32-Cube IDE-FreeRTOS Intertask Communication Part – 1
Queues Allows to pass more information between the tasks. Suspend task if tries to “put” to full queue or “get” from empty one. Semaphores are
STM32-Cube IDE-FreeRTOS Intertask Communication Part – 2
Queues Allows to pass more information between the tasks. Suspend task if tries to “put” to full queue or “get” from empty one. Semaphores are
