Skip to content
Tuesday, October 27, 2026

Kalapi Infotech

Embedded Product – Infotech Developer

  • About Us
  • Topics
    • Interview
    • IOT
      • IOT Sensor’s & Applications
      • IOT – BLE Based Solutions
      • IOT Sensor’s Part 1:Humidity, Pressure, Temperature Sensors.
      • IOT Sensor’s Part 2: Accelerometers, Magnetometers, Time of light Sensors.
      • IOT Sensor’s: Temperature sensor’s
      • IOT Sensor’s: Accelerometer
      • Low Power MCU
    • STM32 Controller’s
      • STM32C031C6Tx microcontroller examples for GPIO, I2C, SPI, and UART using HAL.
      • Comprehensive Comparison of STM32 MCUs: Applications, Features, and Categories
      • STM32C0 Series Overview
    • Embedded
      • Embedded Firmware Architecture Series
      • Embedded Systems
        • Embedded System Design Guide:
        • Embedded System Process Guide
        • As an embedded developer must read books
        • List of video courses as an embedded developer must do
        • Implementation of I2C communication using bit banging
      • STM32 FreeRTOS
        • STM32-Cube IDE-FreeRTOS Code Generation using CubeMx
        • STM32-Cube IDE-FreeRTOS Memory Management
        • STM32-Cube IDE-FreeRTOS Tasks
        • STM32-Cube IDE-FreeRTOS Intertask Communication Part – 1
        • STM32-Cube IDE-FreeRTOS Intertask Communication Part – 2
        • STM32-Cube IDE- FreeRTOS Memory Optimization – Analysis Technique.
      • STM32 Peripheral’s
        • Connectivity
          • UART
            • STM32-Peripheral’s-UART: Polling Mode
            • STM32-Peripheral’s-UART: Interrupt Mode
            • STM32-Peripheral’s-UART: DMA Mode
          • I2C
            • STM32-Peripheral’s- I2C polling mode
            • STM32-Peripheral’s- I2C DMA mode
          • SPI
            • STM32-Peripheral’s-SPI: Polling Mode
            • STM32-Peripheral’s-SPI: Interrupt Mode
            • STM32-Peripheral’s-SPI: DMA Mode
        • Analog
          • STM32-Peripheral’s-DAC:
          • STM32-Peripheral’s-ADC: Polling Method
          • STM32-Peripheral’s-ADC: Continuous Mode
          • STM32-Peripheral’s-ADC: Timer interrupt mode
          • STM32-Peripheral’s-ADC: Watchdog Mode
          • STM32-Peripheral’s-ADC: Scan Mode
          • STM32-Peripheral’s : Comparator
        • GPIO
          • STM32-Peripheral’s-GPIO: Output, Input
          • STM32-Peripheral’s-GPIO: EXTI
        • Timers
          • STM32-Peripheral’s Timers: Base Timer Interrupt Mode
          • STM32-Peripheral’s Timers: Output PWM
          • STM32-Peripheral’s Timers: Input PWM
          • STM32-Peripheral’s Timers: Input Capture Mode
          • STM32-Peripheral’s Timers: Output Compare Mode
  • Contact Us
  • Resources
You are Here
  • Home
  • fleet management

Tag: fleet management

OTA and Safe Firmware Update Architecture: Designing Firmware Updates That Cannot Brick the Device
Embedded Firmware Architecture Embedded System

OTA and Safe Firmware Update Architecture: Designing Firmware Updates That Cannot Brick the Device

October 16, 2026October 27, 202621 min read Chintan Gala

OTA updates that cannot brick a device: commit ordering, a bootloader decision table, every power interruption point, and how many canaries you actually need.

Read More

A/B slots, Bootloader, firmware update architecture, fleet management, OTA updates, rollback, Secure Boot, STM32H7Leave a Comment on OTA and Safe Firmware Update Architecture: Designing Firmware Updates That Cannot Brick the Device
Share
Facebook Twitter Pinterest Linkedin
Field Diagnostics and Firmware Observability: Designing Firmware That Can Explain What Went Wrong
Embedded Firmware Architecture Embedded System

Field Diagnostics and Firmware Observability: Designing Firmware That Can Explain What Went Wrong

October 12, 2026October 27, 202616 min read Chintan Gala

Firmware observability with real budgets: flash endurance arithmetic that caps logging, symbolicating a crash address, and fleet queries that find the cause.

Read More

crash analysis, embedded reliability, field diagnostics, firmware observability, flash endurance, fleet management, STM32H7, telemetryLeave a Comment on Field Diagnostics and Firmware Observability: Designing Firmware That Can Explain What Went Wrong
Share
Facebook Twitter Pinterest Linkedin

Recent Posts

  • OTA and Safe Firmware Update Architecture: Designing Firmware Updates That Cannot Brick the Device
  • Field Diagnostics and Firmware Observability: Designing Firmware That Can Explain What Went Wrong
  • Designing Firmware for a 10-Year Product Lifecycle: Maintainability, Obsolescence and Long-Term Support
  • Designing Firmware for Testability: Unit Testing, Mocks, HIL and Fault Injection
  • Firmware Security Architecture: Secure Boot, Firmware Integrity and Key Management

Archives

  • October 2026
  • September 2026
  • August 2026
  • July 2026
  • June 2026
  • May 2026
  • March 2026
  • January 2026
  • November 2025
  • October 2025
  • September 2025
  • August 2025
  • March 2025
  • December 2024
  • November 2024
  • September 2024
  • February 2024
  • January 2024
  • October 2022
  • September 2022
  • July 2022
  • June 2022
  • May 2022
  • April 2022
  • March 2022
  • February 2022
  • January 2022
  • December 2021
  • November 2021
  • July 2021
  • June 2021
  • February 2021
  • January 2021
  • December 2020
  • November 2020

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

About Us

Embedded Developer | RF | AEROSPACE | SATCOM | SMART METER | IOT

  • linkedin
  • AI/ML (3)
  • Coding Reference Guide (7)
  • Design Patterns (5)
  • Design Patterns (7)
  • Design Reference Guide (3)
  • DSA (8)
  • Embedded Firmware Architecture (12)
  • Embedded System (83)
  • Event-Driven Firmware Architecture (1)
  • Interview (14)
  • IOT (8)
  • Process Reference Guide (1)
  • RTOS (3)
  • Software's (50)
  • STM32 Peripheral's (23)
  • STM32Code (23)
  • STM32CubeIDE (22)

You May Also Like

Safe OTA update sequence showing staging, verification, pending flag commit point, trial boot and rollback path
Embedded Firmware Architecture Embedded System

OTA and Safe Firmware Update Architecture: Designing Firmware Updates That Cannot Brick the Device

October 16, 2026October 27, 202621 min read
Firmware observability architecture showing events, faults and metrics feeding local persistent history and remote telemetry
Embedded Firmware Architecture Embedded System

Field Diagnostics and Firmware Observability: Designing Firmware That Can Explain What Went Wrong

October 12, 2026October 27, 202616 min read
Ten-year firmware product lifecycle timeline: hardware revision in year 2, compiler upgrade in year 4 and MCU migration in year 8
Embedded Firmware Architecture Embedded System

Designing Firmware for a 10-Year Product Lifecycle: Maintainability, Obsolescence and Long-Term Support

October 8, 2026October 27, 202620 min read
Dual-target firmware build enabling fault injection: a shared application core linked against test doubles on the host or production drivers on target
Embedded Firmware Architecture Embedded System

Designing Firmware for Testability: Unit Testing, Mocks, HIL and Fault Injection

October 4, 2026October 27, 202618 min read

K

  • Email
    kalapiinfotech@gmail.com
  • AI/ML
  • Coding Reference Guide
  • Design Patterns
  • Design Patterns
  • Design Reference Guide
  • DSA
  • Embedded Firmware Architecture
  • Embedded System
  • Event-Driven Firmware Architecture
  • Interview
  • IOT
  • Process Reference Guide
  • RTOS
  • Software's
  • STM32 Peripheral's
  • STM32Code
  • STM32CubeIDE
© 2026 Kalapi Infotech. All Rights Reserved.
Proudly powered by WordPress | Theme: Engage News by Candid Themes.